[Skip to Content]

FloAire FX-NDI Series Hood

FloAire FX-NDI Series Hood 1

FloAire FX-NDI Series Hood

FX-NDI Series

Exhaust Only Island Hood

Low exhaust flow rates make for superior efficiency! This Type I hood can meet the challenges of any island-style cooking application.

  • It's a One Piece V-Bank island hood.
  • Fabricated of Type 430 stainless steel, #3 or #4 polish, on all exposed surfaces. Optional type 304 stainless steel available.
  • Double-wall, insulated front increases rigidity.
  • The front design prohibits condensation and directs grease-laden vapors toward the exhaust filter bank. Polished stainless steel on the interior and exterior of the front enhances aesthetics.
  • Fitted with UL-classified stainless steel baffle filters that are removable for cleaning. Optional Captrate Combo®, Captrate Solo®, high-efficiency stainless steel baffle, aluminum baffle, and high-velocity cartridge filters (Model FX-CNDI) are available.
  • Sloped grease drain system with removable 1/2 pint cup for easy cleaning.
  • There are pre-punched hanging angles on each end of the hood. An additional set is provided for hoods longer than 12'.
  • Fitted with UL-listed, pre-wired, incandescent light fixtures and tempered glass globes to hold up to a standard 100-watt bulb.
  • A built-in wiring chase allows for the optimal positioning of electrical controls and outlets on the front face of the hood without penetrating the capture area or requiring an external chase way.
  • Optional integral 3" air space to meet NFPA 96 requirements when the hood is against a limited combustible wall. Optional insulated 3" air space for combustible walls.
  • Optional ETL Listed exhaust fire damper (Model FX-NDI-100).
  • Model FX-NDI is ETL Listed for 400°F, 600°F, and 700°F cooking surfaces (File 102900319PRT-001 without exhaust damper; File 3054804-002 with exhaust damper), ETL Sanitation Listed, and built following NFPA Standard 96.
Contact for Pricing (325) 482-0910